1. Product
IdentificationSynonyms:
3,3',5,5'-Tetrabromo-m-cresolsulfonphthalein; 4,4'-(3H-2,
1-Benzoxathiol-3-ylidene) bis [2,6-dibromo-3 methylphenol]S,S-dioxide; BCG CAS No.: 76-60-8 Molecular Weight: 698.02 Chemical Formula: C21H14O5Br4S Product Codes: 203007
2.
Composition/Information on IngredientsIngredientCAS NoPercentHazardous------------------------------------------------------------------------Bromocresol Green76-60-890 - 100%No
3. Hazards
IdentificationSAF-T-DATA(tm)
Ratings (Provided here for your convenience)
-----------------------------------------------------------------------------------------------------------
Health Rating: 1 - Slight
Flammability Rating: 1 - Slight
Reactivity Rating: 0 - None
Contact Rating: 2 - Moderate
Lab Protective Equip: GOGGLES; LAB COAT; PROPER GLOVES
Storage Color Code: Green (General Storage)
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
---------------------------------- Inhalation: May cause
irritation to the respiratory tract. Symptoms may include coughing and
shortness of breath. Ingestion: Large oral doses may
cause irritation to the gastrointestinal tract. Skin Contact: May cause
irritation with redness and pain. Eye Contact: May cause
irritation, redness and pain. Chronic Exposure: No
information found. Aggravation of Pre-existing
Conditions: No information found.
4. First Aid
MeasuresInhalation: Remove to fresh
air. Get medical attention for any breathing difficulty. Ingestion: Induce vomiting
immediately as directed by medical personnel. Never give anything by mouth to
an unconscious person. Get medical attention. Skin Contact: Immediately flush
skin with plenty of water for at least 15 minutes. Remove contaminated
clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before
reuse. Get medical attention if irritation develops. Eye Contact: Immediately flush
eyes with plenty of water for at least 15 minutes, lifting upper and lower
eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting
MeasuresFire: As with most organic
solids, fire is possible at elevated temperatures or by contact with an
ignition source. Explosion: Fine dust dispersed
in air in sufficient concentrations, and in the presence of an ignition source
is a potential dust explosion hazard. Fire Extinguishing Media: Water
spray, dry chemical, alcohol foam, or carbon dioxide. Special Information: In the
event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full facepiece operated in the
pressure demand or other positive pressure mode.
6. Accidental
Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective
equipment as specified in Section 8. Spills: Sweep up and containerize for
reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust
dispersal.
7. Handling and
Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area.
Protect against physical damage. Containers of this material may be hazardous
when empty since they retain product residues (dust, solids); observe all
warnings and precautions listed for the product.
8. Exposure
Controls/Personal ProtectionAirborne Exposure Limits: None
established. Ventilation System: A system of
local and/or general exhaust is recommended to keep employee exposures as low
as possible. Local exhaust ventilation is generally preferred because it can
control the emissions of the contaminant at its source, preventing dispersion
of it into the general work area. Please refer to the ACGIH document, Industrial
Ventilation, A Manual of Recommended Practices, most recent edition, for
details. Personal Respirators (NIOSH Approved):
For conditions of use where exposure to dust or mist is apparent and
engineering controls are not feasible, a particulate respirator (NIOSH type
N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting
fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For
emergencies or instances where the exposure levels are not known, use a
full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying
respirators do not protect workers in oxygen-deficient atmospheres. Skin Protection: Wear
protective gloves and clean body-covering clothing. Eye Protection: Use chemical
safety goggles. Maintain eye wash fountain and quick-drench facilities in work
area.
9. Physical and
Chemical PropertiesAppearance: Light brick colored
powder. Odor: Odorless or faint
medicinal odor. Solubility: Slightly soluble in
water. Specific Gravity: No
information found. pH: No information found. % Volatiles by volume @ 21C (70F):
0 Boiling Point: Not applicable. Melting Point: 218C (424F) Vapor Density (Air=1): No
information found. Vapor Pressure (mm Hg): No
information found. Evaporation Rate (BuAc=1): No
information found.
10. Stability and
ReactivityStability: Stable under
ordinary conditions of use and storage. Hazardous Decomposition Products:
Burning may produce bromines, sulfur oxides, carbon dioxide, and carbon
monoxide. Hazardous Polymerization: Will
not occur. Incompatibilities: Strong
oxidizers. Conditions to Avoid: No
information found.
11. Toxicological
Information
No LD50/LC50 information found relating to normal routes of occupational
exposure. Investigated as a mutagen.
--------\Cancer
Lists\------------------------------------------------------
---NTP Carcinogen---
IngredientKnownAnticipatedIARC Category
-----------------------------------------------------------------
Bromocresol Green (76-60-8)NoNoNone
12. Ecological
InformationEnvironmental Fate: No
information found. Environmental Toxicity: No
information found.
13. Disposal
Considerations
Whatever cannot be saved for recovery or recycling should be managed in an
appropriate and approved waste disposal facility. Processing, use or
contamination of this product may change the waste management options. State
and local disposal regulations may differ from federal disposal regulations.
Dispose of container and unused contents in accordance with federal, state and
local requirements.
14. Transport
Information
Not regulated.
15. Regulatory
Information--------\Chemical Inventory
Status - Part 1\---------------------------------
IngredientTSCAEC
Japan
Australia--------------------------------------------------------------------
Bromocresol Green (76-60-8)YesYesNoYes--------\Chemical Inventory
Status - Part 2\---------------------------------
--
Canada--Ingredient
KoreaDSLNDSLPhil.
----------------------------------------------------------------
Bromocresol Green (76-60-8)YesYesNoYes--------\Federal, State
& International Regulations - Part 1\----------------
-SARA 302-------SARA
313------
IngredientRQTPQListChemical Catg.
-------------------------------------------------------------------
Bromocresol Green (76-60-8)NoNoNoNo
--------\Federal, State
& International Regulations - Part 2\----------------
-RCRA--TSCA-
IngredientCERCLA261.338(d)
-----------------------------------------------------------
Bromocresol Green (76-60-8)NoNoNo
16. Other
InformationNILE CHEMCIALS. provides the information
contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. This document is intended only as a guide to
the appropriate precautionary handling of the material by a properly trained
person using this product. Individuals receiving the information must exercise
their independent judgment in determining its appropriateness for a particular
purpose.
NILE
CHEMICALS MAKES NO REPRESENTATIONS
OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT
TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION
REFERS. ACCORDINGLY,
NILE
CHEMICALS. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR
RELIANCE UPON THIS INFORMATION.
NILE CHEMICALS